mbr2150 document number: ds36959 rev. 4 - 2 1 of 8 www.diodes.com june 2014 ? diodes incorporated mbr2150 high voltage power schottky rectifier product summary v rrm (v) i o (a) v f (max) (v) @ +25c i r (max) (ma) @ +25c 150 2 0.85 0.1 description the mbr2150 is a high voltage schottky rectifier suited for switch mode power supplies and other power converters. this device is intended for use in medium voltage operation, and particularly, in high frequency circuits where low switching losses and low noise are required. the mbr2150 is available in standard do-214ac and do-15 packages. applications ? power supply-output rectification ? power management ? instrumentation features ? low forward voltage: 0.85v at +25 c ? high surge current capacity ? operating junction temperature: +150 c ? guard ? ring for stress protection ? 2a total ? lead free packages available ? do-214ac and do-15 ? lead-free finish; rohs compliant (notes 1 & 2) ? available in ?green? packages: do-214ac and do-15 ? lead-free finish; rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) mechanical data ? case: do-214ac and do-15 ? case material: molded plastic, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte ti n annealed over copper leadframe. solderable per mil-std-202, method 208 ? weight: ? do-15 ? 0.39grams (approximately) ? do-214ac ? 0.062grams (approximately) do-214ac do-15 notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (roh s 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. pin assignments (top view) (top view) do-214ac do-15 cathode line by marking cathode anode cathode line by marking cathode anode
mbr2150 document number: ds36959 rev. 4 - 2 2 of 8 www.diodes.com june 2014 ? diodes incorporated mbr2150 ? green ? green ordering information (note 4) note 4: diodes ic's pb-free products, as designated with "e 1" suffix in the part number, are rohs compliant. products with " g1" suffix are available in green packages. package part number marking id packing do-214ac mbr2150vrtr-e1 2150ve 7500/tape & reel do-214ac mbr2150vrtr-g1 2150vr 7500/tape & reel do-15 mbr2150vg-e1 2150vg 500/bulk do-15 mbr2150vg-g1 2150gg 500/bulk do-15 mbr2150vgtr-e1 2150vg 1500/ammo do-15 mbr2150vgtr-g1 2150gg 1500/ammo marking information (1) do-214ac (top view) first line: logo and date code y: year ww: work week of molding a: assembly house code second line: marking id (see ordering information) pb pb pb ? green ywwa xxxxxx
mbr2150 document number: ds36959 rev. 4 - 2 3 of 8 www.diodes.com june 2014 ? diodes incorporated mbr2150 marking information (cont.) (2) do-15 (top view) maximum ratings (note 5) characteristic symbol rating unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 150 v average rectified forward current (rated v r , t c = tbd) i f(av) 2 a non repetitive peak surge current (surge applied at rated load conditions half wave, single phase, 60hz) i fsm 75 a operating junction temperature range (note 6) t j -65 to +150 c storage temperature range t stg -65 to +150 c voltage rate of change (rated v r ) dv/dt 10000 v/s esd (machine model = c) ? 400 v esd (human body model = 3b) ? 8000 v notes: 5. stresses greater than those listed under ?absolut e maximum ratings? may cause per manent damage to the device. the se are stress ratings only, and functional operation of the device at these or any other conditions beyond those in dicated under ?recommended operating conditi ons? is not implied. exposure to ?absolute maximum ratings? for extended periods may affect device reliability. 6. the heat generated must be less than the thermal conductivity from junction to ambient: dp d /dt j < 1/ ja . first line: logo and date code y: year ww: work week of molding a: assembly house code second line: marking id (see ordering information) ywwa xxxxxx
mbr2150 document number: ds36959 rev. 4 - 2 4 of 8 www.diodes.com june 2014 ? diodes incorporated mbr2150 thermal characteristics characteristic symbol rating unit maximum thermal resistance (junction to lead) (note 7) r jl do-214ac 23 o c/w do-15 maximum thermal resistanc e (junction to ambient) (note 7) r ja do-214ac 90 do-15 80 note 7: device mounted on heat sink, with minimum recommended pad layout per http://www.diodes.com electrical characteristics characteristic symbol rating unit test condition maximum instantaneous forward voltage drop (note 8) v f (max) 0.85 v i f = 2a, t c = +25 c 0.67 i f = 2a, t c = +125 c maximum instantaneous reverse current (note 8) i r (max) 0.1 ma rated dc voltage, t c = +25 c 2.0 rated dc voltage, t c = +125 c note 8: short duration pulse test used to minimize self-heating effect, pulse test: pulse width = 300s, duty cycle 2.0%. figure 1. typical forward characteristics figure 2. typical reverse characteristics 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1 10 i f , instantaneous forward current (a) v f , instantaneous forward voltage (v) t j =25 o c t j =125 o c t j =150 o c 0 20 40 60 80 100 120 140 160 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 t j =150 o c t j =125 o c v r , instantaneous reverse voltage (v) i r , instantaneous reverse current ( a) t j =25 o c
mbr2150 document number: ds36959 rev. 4 - 2 5 of 8 www.diodes.com june 2014 ? diodes incorporated mbr2150 package outline dimensions (all dimensions in mm(inch).) (1) package type: do-214ac
mbr2150 document number: ds36959 rev. 4 - 2 6 of 8 www.diodes.com june 2014 ? diodes incorporated mbr2150 package outline dimensions (cont. all dimensions in mm(inch).) (2) package type: do-15 0. 700(0. 028) 0. 900( ) 25. 400(1. 000) min dia. dia. 25. 400(1. 000) min cathode line by marking 5.800(0.228) 7.600(0.299) 2.600(0.102) 3.600(0.142) 0.035
mbr2150 document number: ds36959 rev. 4 - 2 7 of 8 www.diodes.com june 2014 ? diodes incorporated mbr2150 suggested pad layout (1) package type: do-214ac dimensions y (mm)/(inch) x1 (mm)/(inch) g (mm)/(inch) x (mm)/(inch) value 2.100/0.083 2.000/0.079 1.600/0.063 5.600/0.220
mbr2150 document number: ds36959 rev. 4 - 2 8 of 8 www.diodes.com june 2014 ? diodes incorporated mbr2150 important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described he rein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
